عربي

Hot Insulation ( Rock Wool )

Metal Jacket

- Fabrication of metal jacket ( Aluminum , Galvanized Steel , Stainlesssteel )according to specification.

- Making a longitudinal and circumference seam to metal jacket, which shall be appliedto ensure a tight fit over the insulation and to prevent any lifting of the lapping edge at the longitudinal seam. All longitudinal seams shall be staggered on alternative side of the pipe and laps shall be located togive maximum protection from wind and rain.metal jacket sheets shall be overlapped male to female in order to increase the regidity.

The metal shall be cut sufficient length to provide a minimum 50mm lap at the longitudinal seam.
The jacket shall be applied with a minimum circumferential lap of 50mm.

 

Insulation of Pipe fitting

- The insulation for pipe elbows shall be fabricated from mitred segmentof the straight pipe sectional insulation, cut to conform to the radius of the Elbow. .

 

 

Next

Back

Insulations

Hot Insulation

Construct Steel Scaffolding Around the Equipments(Tanks, boilers, Heat exchanger, Skid, ) to be insulated....... Read mor

Cold Insulations

Fabrication of metal jacket according to specification,making a longitudinal and circumference seam to Alumin.. Read more

Metal Jacket

Fabrication of metal jacket ( Aluminum , Galvanized Steel , Stainlesssteel )according to specification...... Read more

Insulation of Valves & Double flanges

Fabrication of Removable boxes for the Valves and flanges to be carrying out during maintenance works accor ......Read more