عربي

- The proper number of mitres is required onأحد للمقاولات الهندسية an Elbow so as
provide a goodclosure. A general guide is as follow: to 4"pipe is 4 mitres, to 6" pipe is6 mitres, to 10" pipe is 8 mitres , to 18"pipe is 10 mitres , and above is 12 mitres.

- Any penetration of the metal jacket by pipe supports, nipples etc., will beweatherproofed by metalflashing

أحد للمقاولات الهندسية

Insulation of Valves & Double flanges

- Fabrication of Removable boxes for the Valves and flanges to be carrying out during maintenance works according to specification.
- Any penetration of the metal jacket by pipe supports, nipples etc., will be weatherproofed by metal flashing.

Accessories &auxiliaries Materials

- Fix the metal jacket using Galvanized, S.S tapping Screw Type(0.5*10)
- The proper number 7 Screw / M. long
- Using a sealant material (silicon Or mastic tap)
- Site Clean-up and removal of All Materials , Lost Materials And Equipments After Finishing the insulation job.

Next

Back

Insulations

Hot Insulation

Construct Steel Scaffolding Around the Equipments(Tanks, boilers, Heat exchanger, Skid, ) to be insulated....... Read mor

Cold Insulations

Fabrication of metal jacket according to specification,making a longitudinal and circumference seam to Alumin.. Read more

Metal Jacket

Fabrication of metal jacket ( Aluminum , Galvanized Steel , Stainlesssteel )according to specification...... Read more

Insulation of Valves & Double flanges

Fabrication of Removable boxes for the Valves and flanges to be carrying out during maintenance works accor ......Read more